ZIPPY -


Keywords Search：

	New Products
	Products

Model No

Search：

【1U Single】H1M-6600P

600W

Server,Workstation,Storage System,IPC,Blade server

250.00x100.00x40.50 (mm)
9.84x3.94x1.59 (inch)

VOLTAGE: 90 ~ 264 VAC FULL RANGE
FREQUENCY: 47 ~ 63 Hz
INPUT CURRENT: 7A/11A (RMS) FOR 230/115 VAC
INRUSH CURRENT: 90A/130A MAX. FOR 115/230 VAC PER MODULE

Output Voltage	Output Current Min.	Output Current Max.	Output Current Peak	Regulation Load	Regulation Line	Output Ripple & Noise Max.[P-P]
+5V	1	30.00			±50mV	50mV

-5V

0.5

±50mV

100mV

+12V

2.0

±50mV

100mV

-12V

0.5

±50mV

100mV

+3.3V

±50mV

50mV

+5VSB

0.1

±50mV

50mV

‧TEMPERATURE RANGE: 0℃---40℃, -20℃---80℃
‧HUMIDITY:OPERATING:20%-95%, NON-OPERATING:10%-95%
‧REMARKS:85% IS NORMAL CONDITION AND 95% IS WITH SPECIAL COATING PROCESS
‧HOLD UP TIME: 16ms MINIMUM
‧DIELECTRIC WITHSTAND: INPUT/OUTPUT 1500 VAC FOR 1 MINUTE
INPUT TO FRAME GROUND 1500 VAC FOR 1 MINUTE
‧HUMIDITY: 10~90%RH
‧EFFICIENCY: 70% TYPICAL AT 115V, AT FULL LOAD
‧POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1ms
‧ OVER LOAD PROTECTION: 110~160% MAX.
‧OVER VOLTAGE PROTECTION: +5V→5.7V~6.5V, +3.3V→3.7V~4.1V, +12V→12.8V~13.9V
‧EMI NOISE FILTER: FCC CLASS B, CISPR 22 CLASS B
‧SAFETY: EACH POWER UNIT MEET UL/CSA/TUV STANDARD
‧ MEET IEC-1000-3-2 CLASS D

*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.

	CB
	TUV
	MTBF
	FCC
	DRAWING
	CE(Radiation)