www.Zippy.com.tw -


Keywords Search：

	New Products
	Products

Model No

Not found~

Search：

【? High Efficiency】PSL-6A00V

1000W

Server,Workstation,Storage System

220.00x150.00x86.00 (mm)
8.66x5.91x3.39 (inch)

VOLTAGE: 90 ~ 264 VAC FULL RANGE
FREQUENCY: 47 ~ 63 Hz.
STEADY-STATE CURRENT: 14/7A AT ANY LOW/
HIGH RANGE INPUT VOLTAGE
INRUSH CURRENT: 20A MAX. FOR 110 VAC ,
40A MAX. FOR 220 VAC
(AT 25 DEGREE C AMBIENT COLD START)
PFC: UP TO THE TARGET OF 95% @230V, FULL LOAD

Output Voltage	Output Current Min.	Output Current Max.	Output Current Peak	Regulation Load	Regulation Line	Output Ripple & Noise Max.[P-P]
+5V	1	25.00		±250mV	±1%	60mV

+12V1

±600mV

±1%

120mV

+12V2

±600mV

±1%

120mV

-12V

0.8

±600mV

±1%

120mV

+3.3V

±165mV

±1%

60mV

+5VSB

0.1

3.5

±250mV

±1%

60mV

+3.3V and +5V MAX. POWER: 170W
+3.3V AND +5V AND +12V2 MAX. POWER:600W
TOTAL POWER: 1000W(MAX)

‧TEMPERATURE RANGE: OPERATING 0℃ -- 40℃; STORAGE TEMPERATURE: -20℃ – 80℃
‧HOLD UP TIME: 18mS MINIMUM AT 90V FULL LOAD & NOMINAL INPUT VOLTAGE
‧EFFICIENCY: 81%-86% TYPICAL AT 115V, FULL LOAD
‧LEAKAGE CURRENT: 3.5 mA. MAX. AT NOMINAL VOLTAGE 264VAC
‧POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
‧OVER POWER PROTECTION: 110%~160%
‧OVER VOLTAGE PROTECTION: +3.3V→3.6~4.3V, +5V→5.5~6.5V, +12V1→13.2~15.6V, +12V2→13.2~15.6V
‧OVER CURRENT PROTECTION: +3.3V→27.5~37.5A, +5V→ 27.5~37.5A, +12V1→55~75A, +12V2→55~75A
‧SHORT CIRCUIT PROTECTION: +3.3V, +5V, +12V1, +12V2, -12V
‧SAFETY: TUV, CB, CCC, RFI/EMI STANDARDS
‧EMI NOISE FILTER: FCC CLASS B, CISPR22 CLASS B
‧COOLING: 8 0mm DC FANS
‧I2C FEATURES (OPTIONAL)

*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.

	MANUAL
	Manual-Chinese
	FCC
	DRAWING
	DRAWING
	MTBF(ROHS)
	TUV
	CB
	MTBF(RoHS)(50℃)
	MTBF(RoHS)(50℃)(NO FAN)