www.Zippy.com.tw -


Keywords Search：

	New Products
	Products

Model No

Not found~

Search：

【◎ High Efficiency】M1W4-5R20V3H

2720W

Server,Workstation,Storage System

340.00x422.00x43.00 (mm)
13.39x16.61x1.69 (inch)

VOLTAGE：90～264VAC FULL RANGE
FREQUENCY：47～63HZ
INPUT CURRENT：45/22.5A FOR 115/230VAC
INRUSH CURRENT (PER POWER MODULE)：15/30A MAX. FOR 115/230VAC (25℃)

Output Voltage	Output Current Min.	Output Current Max.	Output Current Peak	Regulation Load	Regulation Line	Output Ripple & Noise Max.[P-P]
+5V	1	24.00		±5%	±1%	50mV

+12V

223

±5%

±1%

120mV

-12V

1.5

±5%

±1%

120mV

+3.3V

±5%

±1%

50mV

+5VSB

0.1

±5%

±1%

50mV

TOTAL MAX OUTPUT OF +5V AND +3.3V NOT EXCEED 135W.
TOTAL OUTPUT POWER NOT EXCEED 2720W.

* TEMPERATURE RANGE：OPERATING 0℃～50℃，STORAGE -20℃～80℃
* HOLD UP TIME：16mS IN REGULATION LIMIT AT 90 VAC INPUT VOLTAGE
* DIELECTRIC WITHSTAND：INPUT/OUTPUT 1500 VAC FOR 1 MINUTE INPUT TO FRAME GROUND 1500 VAC FOR 1 MINUTE
* EFFICIENCY：84% TYPICAL，AT FULL LOAD 115VAC
* POWER GOOD SIGNAL：ON DELAY 100mS TO 550mS
* OVER POWER PROTECTION：110～150% MAX
* OVER VOLTAGE PROTECTION：+5V→5.7V～6.5V，+3.3V→3.7V～4.1V ，+12V→12.8 V～13.9V
* SHORT CIRCUIT PROTECTION: +5V,+12V,+3.3V,-12V,+5VSB
* REMOTE ON / OFF CONTROL
* REMOTE SENSING DESIGN
* BALANCE LOAD SHARING DESIGN
* HOT-SWAPPABLE/HOT PLUGGABLE REDUNDANCY FUNCTION
* ISOLATION: BUILT-IN THE POWER MODULE
* FAULTY ALARM METHODS: LED, BUZZER, TTL SIGNAL
* AC INLET IN EACH MODULE
* EMI NOISE FILTER: CISPR 22 CLASS B
* MEET IEC-1000-3-2 CLASS D (ACTIVE PFC)
* SAFETY：TO MEET UL, CUL, TUV

*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.

	TUV
	CCC
	MTBF(ROHS)
	DRAWING