Search:
Easy SwapKIN1-5A00V4H

1000W

Server ,Workstation ,Storage System ,IPC ,Blade server ,Communication

397x79x40(mm)
15.63x3.11x1.57(inch)

VOLTAGE: 90~264VAC(OUTPUT:1000W);
180~264VAC(OUTPUT: 1200W) FULL RANGE
FREQUENCY: 47~63HZ
INPUT CURRENT:7A(RMS)FOR 230VAC,
15A(RMS)FOR 115VAC
INRUSH CURRENT:18A MAX. FOR 115 VAC PER MODULE,
36A MAX. FOR 230 VAC PER MODULE
PFC CAN REACH THE TARGET OF 95% @110V, FULL LOAD,
FOLLOWING THE STANDARD OF EN 610003-2, CLASS D.


Output VoltageTD Output Current Min. Output Current Max. Regulation Load Regulation Line Output Ripple & Noise Max.[P-P]
+5V1.2 0.5 32 ±5% ±1% 50mV
+12V1.2 2 83 ±5% ±1% 120mV
-12V1.2 0 0.5 ±10% ±1% 120mV
+3.3V1.2 0.5 32 ±5% ±1% 50mV
+5VSB1.2 0.1 3.5 ±5% ±1% 50mV
* TOTAL OUTPUT MAX 1000W
* THE OUTPUT POWER OF 5V & 3.3V NOT EXCEED 190W


* TEMPERATURE RANGE:OPERATING 0℃~40℃,STORAGE -20℃~80℃
* HOLD UP TIME:WHEN POWER SHUTDOWN DC OUTPUT 5V MUST BE MAINTAIN 16mSEC IN REGULATON LIMIT AT NORMAL INPUT VOLTAGE.
* EFFICIENCY:TYPICAL 86%(MAX) at 230V
* POWER GOOD SIGNAL:ON DELAY 100mS TO 500mS,OFF DELAY 1Ms
* OVER POWER PROTECTION:110~150% MAX
* OVER VOLTAGE PROTECTION: +3.3V→3.9~4.6V, +5V→5.8~6.9V, +12V→13.9~16.4V
* SHORT CIRCUIT: +5V, +3.3V, +12V, -12V, +5VSB
* OVER CURRENT PROTECTION: +3.3V→35.2~48A, +5V→35.2~48A, +12V→91~125A
* LEAKAGE CURRENT: 3.5MA. MAX. AT NOMINAL VOLTAGE 250VAC
* REMOTE ON/OFF CONTROL
* SAFETY:TO MEET UL&CUL, TUV, CCC

*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.