Search:
PS2+PSL-6A00V

1000W

Server ,Workstation ,Storage System

220x150x86(mm)
8.66x5.91x3.39(inch)

VOLTAGE: 90 ~ 264 VAC FULL RANGE
FREQUENCY: 47 ~ 63 Hz.
STEADY-STATE CURRENT: 14/7A AT ANY LOW/
HIGH RANGE INPUT VOLTAGE
INRUSH CURRENT: 20A MAX. FOR 110 VAC ,
40A MAX. FOR 220 VAC
(AT 25 DEGREE C AMBIENT COLD START)
PFC: UP TO THE TARGET OF 95% @230V, FULL LOAD


Output Voltage Output Current Min. Output Current Max. Regulation Load Regulation Line Output Ripple & Noise Max.[P-P]
+5V 1 25 ±250mV ±1% 60mV
+12V1 1 50 ±600mV ±1% 120mV
+12V2 1 50 ±600mV ±1% 120mV
-12V 0 0.8 ±600mV ±1% 120mV
+3.3V 1 25 ±165mV ±1% 60mV
+5VSB 0.1 3.5 ±250mV ±1% 60mV
+3.3V and +5V MAX. POWER: 170W
+3.3V AND +5V AND +12V2 MAX. POWER:600W
TOTAL POWER: 1000W(MAX)


‧TEMPERATURE RANGE: OPERATING 0℃~40℃; STORAGE TEMPERATURE: -20℃~80℃
‧HOLD UP TIME: 18mS MINIMUM AT 90V FULL LOAD & NOMINAL INPUT VOLTAGE
‧EFFICIENCY: 81%-86% TYPICAL AT 115V, FULL LOAD
‧LEAKAGE CURRENT: 3.5 mA. MAX. AT NOMINAL VOLTAGE 264VAC
‧POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
‧OVER POWER PROTECTION: 110%~160%
‧OVER VOLTAGE PROTECTION: +3.3V→3.6~4.3V, +5V→5.5~6.5V, +12V1→13.2~15.6V, +12V2→13.2~15.6V
‧OVER CURRENT PROTECTION: +3.3V→27.5~37.5A, +5V→ 27.5~37.5A, +12V1→55~75A, +12V2→55~75A
‧SHORT CIRCUIT PROTECTION: +3.3V, +5V, +12V1, +12V2, -12V
‧SAFETY: TO MEET TUV, CB, RFI/EMI STANDARDS
‧EMI NOISE FILTER: FCC CLASS B, CISPR22 CLASS B
‧COOLING: 80mm DC FANS
‧I2C FEATURES (OPTIONAL)


*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.

 


zippy,1U Redundant,1U Single,2U Redundant,2U Single,3U Single,Cloud Power,Easy Swap,Medical,Micro Redundant,Mini 1U Single,Mini Redundant,N+1 Redundant,Open Frame,PS2,PS2*2 Redundant,PS2+,Redundant module