Search:
Easy SwapBMTW1-5601V3H

600W

Server ,Workstation ,Storage System ,IPC ,Blade server ,PCs ,Communication

340x102x41(mm)
13.39x4.02x1.61(inch)

VOLTAGE: 19~36 VDC, NORMAL 24VDC
STEADY-STATE CURRENT: 19~36VDC / 45~ 21 AMP
(33 AMP AT 24VDC)
INRUSH CURRENT: 50 AMPS @24VDC
(AT 25 DEGREES AMBIENT COLD START FOR EACH POWER UNIT)


Output VoltageTD Output Current Min. Output Current Max. Regulation Load Regulation Line Output Ripple & Noise Max.[P-P]
+5V 0.5 42 ± 5% ± 1% 60mV
+12V 2 50 ± 5% ± 1% 120mV
-12V 0 0.8 ± 5% ± 1% 120mV
+3.3V 0.5 20 ± 5% ± 1% 50mV
+5VSB 0.1 3.5 ± 5% ± 1% 50mV
* +5V AND +3.3V TOTAL OUTPUT MAX : 230W
* TOTAL OUTPUT MAX : 600W (AT 18V ONLY 550W, AT 17V ONLY 500W)
* DE-RATING AT +12V RAIL AMPERE OUTPUT WHEN NEEDED, BOTH +5V AND +3.3V MAXIMUM OUTPUT REMAIN ON SAME


* TEMPERATURE RANGE: OPERATING 0℃ ~ 60℃, STORAGE –20℃ ~ 80℃
* HOLD UP TIME: WHEN POWER SHUTDOWN DC OUTPUT 5V MUST BE MAINTAIN 1MSEC IN REGULATION LIMIT AT NORMAL INPUT VOLTAGE
* EFFICIENCY: TYPICAL >80% AT 24VDC
* POWER GOOD SIGNAL: ON DELAY 100 ms TO 550 ms, OFF DELAY 1 ms
* OVER POWER PROTECTION: 110~160%
* OVER VOLTAGE PROTECTION: +3.3V→3.9~4.3V, +5V→5.9~6.7V, +12V→13.3~15V
* OVER CURRENT PROTECTION: THE POWER SUPPLY SHALL LATCH OFF IF THE +12V OUTPUT CURRENTS ARE OVER IT’S LIMITATION. THE LIMITED CURRENT IS OVER 110~160% FOR EACH POWER MODULE.
* SHORT CIRCUIT PROTECTION: A SHORT CIRCUIT PLACED ON +5V,+3.3V,+12V OUTPUT TO DC RETURN SHALL CAUSE NO DAMAGE AND POWER SUPPLY LATCH. -12V SHORT CIRCUIT TO DC RETURN SHALL CAUSE NO DAMAGE
* REMOTE ON/OFF CONTROL
* SAFETY: MEET UL, CUL, TÜV, CCC

*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.